H25 Hydra-Cell High Pressure Coolant Pumps

 

H25 High Pressure Coolant Pump for up to 20 GPM and Pressures up to 1,000 PSI

 

H25 Hydra-Cell high pressure coolant pumps are used to deliver coolant at 9 to 20 GPM flow rates and at pressures up to 1000 PSI.  As pictured above, H25 Hydra-Cell pumps are designed to be installed alongside your coolant reservoir.

 

The sealless design of H25 high pressure coolant pumps enable you to minimize the filtration level of your coolant system; competitors using piston, plunger, gear and multistage centrifugal designs often suggest filtering your coolant as low as 25 microns; in some cases this strips coolant of the very additives which help reduce foaming and extend coolant life!  The H25 enables you to simply filter to protect other systems components, such as your rotary unions or tooling.  The result is using less expensive filter bags and frequency of changing filter bags; in some cases we can replace your support basket to a 20 mesh lined design to eliminate filter bags altogether!

 

Your tooling supplier will advise you of the flow rate required to attain the desired pressure with your largest tool and with this information we can select the closest pump displacement to minimize the volume of bypassed coolant.  The pressure regulating valve is also sealless and ensures that the pressure beyond it doesn't exceed whatever you've set it to.  If you want to operate at 800 PSI, you set the valve accordingly and when tools are changed the valve automatically regulates the bypassed flow to ensure a constant pressure through the tool.

 

AFFORDABLE

H25 Hydra-Cell high pressure coolant pumps provide many years of continuous operation while requiring very little maintenance.  Approximately every 6000 hours of use you will need to replace the oil with 3 quarts of standard 10W30 synthetic motor oil and replace the check valves - costing <$400 and requiring no special tools or training.  The entire overhaul should take no longer then 1 hour from start to finish.

 

The H25 Hydra-Cell high pressure coolant pump package above consists of pump P/N H25EMCGHFECA, 15HP motor P/N M1500TE12F3P284TCA3, baseplate P/N 104-304, Pump/Motor adapter P/N A04-041-1202 and shaft coupling P/N A04-048-1204.  The sealless pressure regulating valve P/N is C63AABVSSJG.

 

H25 Hydra-Cell Pump catalog pages
H25 Catalog
H25 Installation, Operation, Maintenance Manual
H25 IOM
H25 Hydra-Cell Pump Parts Manual
H25 Parts